This method describes the sensory evaluation of green beer.
breweries
In monitoring the status of the sensory characteristics of an intermediate product prior to testing the final product, it is essential that it is true to style (classification as a defined beer style) and that it is free of any atypical sensory characteristics.
The source of these atypical characteristics can be grouped into the following:
environmental contaminants (e.g., cleaning and disinfection residues, metal ions, ...)
microorganisms (contamination)
differences due to biological and chemical changes (fermentation problems, oxidation, enzymatic reactions, thermal stress, incomplete reactions due to disruptions during processing, …)
The PAH compounds are concentrated through extraction with cyclohexane and evaporation. The separation is carried out by means of high-performance thin-layer chromatography. The results are evaluated through examination under UV light, followed by comparison of the Rf values with the reference substances.
Determination of the fermentation cellar yield in order to monitor brewhouse operations
Wort from the midpoint of chilling/pitching wort
The fermentation cellar yield is calculated using the value determined for the amount of extract contained in a batch of wort relative to the amount of extract present in the raw materials used to produce the wort.
The gelatinization temperature can be determined using a rotary viscometer (e.g., Amylograph or Viscograph, Brabender GmbH & Co. KG, Germany [4] or a Rapid-Visco-Analyser, RVA, Perten Instruments, a PerkinElmer Company, USA [8]).
A suspension consisting of a finely ground sample and water is produced, whose precise mixing ratio should correspond to the analysis protocol for the adjunct in question. However, since for many cereals and pseudocereals no official analysis protocol exists, the initial weight for the adjuncts listed in table 2 has been determined empirically [3].
Once the suspension is prepared it is attempered according to a pre-programmed temperature/time program, and the viscosity is determined on a continuous basis by means of a rotor and a rotary torque measurement (fig. 1). When gelatinization begins, an increase in the viscosity is registered, and the corresponding sample temperature is defined as the gelatinization temperature. The standard evaluation criterion (PT) is a viscosity increase of at least 24 cP (≙ mPas) within six seconds.
Barley intended for the production of malt is to be evaluated on the basis of the characteristics described below.
visual assessment
This method describes how to determine whether kernels are cracked as part of the visual and manual inspection of a lot of barley.
Barley intended for the production of malt is to be evaluated on the basis of the characteristics described below.
Visual assessment