This method describes the conditions under which sensory analysis should be carried out.
beer, beer-based beverages, non-alcoholic beverages, mineral water
One of the basic prerequisites for properly conducting sensory analysis is selecting suitable candidates as members of the tasting panel.
Whole leaf hops which are intended for use in the brewing and food production industries
Whole leaf hops are typically evaluated before being processed further by hop product manufacturers or prior to use in a brewery. It is recommended that an evaluation sheet be used for manual evaluation of hops such as the "Evaluation Form" from the Gesellschaft für Hopfenforschung e.V.
The method is suitable for the determination of water vapor volatile aroma compounds in beer.
Volatile aroma compounds are driven out of the sample through steam distillation. The ethanolic distillate is saturated with NaCl. Potassium hydrogen sulfite is added to separate carbonyl groups that might interfere with the analysis. The extraction of the aroma compounds is performed by shaking out with dichloromethane and the phases separated by centrifuging.
This method describes how to determine whether kernels are cracked as part of the visual and manual inspection of a lot of barley.
Barley intended for the production of malt is to be evaluated on the basis of the characteristics described below.
Visual assessment
This method describes how to determine whether a lot of grain is contaminated with ergot visually through manual inspection.
Barley intended for the production of malt; therefore, the kernels are to be evaluated on the basis of the characteristics described below.
A representative sample of grain is visually inspected for the presence of ergot sclerotia.
This method describes how to determine not only the variety of barley but whether a lot of barley consists of a mix of varieties.
Barley intended for malt production as well as barley malt
Separation and identification of the protein (hordein) fraction of barley or barley malt by means of gel electrophoresis. The method is suitable for all types of barley, as long as reference substances are available. However, the method cannot be used to identify barley varieties used to produce malt that has been so strongly modified that the protein fraction is almost completely degraded.