The method is suitable for the determination of water vapor volatile aroma compounds in beer.
Volatile aroma compounds are driven out of the sample through steam distillation. The ethanolic distillate is saturated with NaCl. Potassium hydrogen sulfite is added to separate carbonyl groups that might interfere with the analysis. The extraction of the aroma compounds is performed by shaking out with dichloromethane and the phases separated by centrifuging.
This method describes the determination of four hop aroma compounds found in hops and hop products using gas chromatography.
Hops and hop products intended for use in beer brewing or elsewhere in the food industry
The hop oil obtained through steam distillation (refer to links) is dissolved in an organic solvent, separated into its components by means of gas chromatography and determined with a flame ionization detector. The contents are expressed as a percentage of the area of each component compared to the overall area of the peak.
This method is suitable for the determination of steam-volatile aroma compounds in wort.
Volatile aroma compounds are driven out of the sample through steam distillation. The ethanol distillate is adjusted to be alkaline and saturated with NaCl. The extraction of the aroma compounds is performed by shaking out with dichloromethane and the phases separated by centrifuging. The organic phase is further concentrated in a stream of nitrogen gas. An ammonia solution is added to remove the acids, because the acids would co-elute, thus preventing quantification of the target substances.
The method is suitable for beer brewed to any original gravity or to any alcohol content.
Volatile compounds in beer are concentrated through distillation and extracted with dichloromethane. The solvent phase is analyzed with a gas chromatograph. The linearity of the detector and the determination of the concentrations of analytes in the sample are achieved by using multiple concentration levels within the relevant range and through evaluation of the relative area under the peaks.
This method describes how to determine the acid consumption or acid capacity of water.
Water intended for use as an ingredient in the production of beer (brewing liquor) or other foods
Determination of the total acidity through titration
This method is used to determine the total titratable acids in beverages and concentrates.
Titratable acidity represents the sum of the free acids present in a beverage, with the exception of the dissolved carbon dioxide (carbonic acid). In fruit juices and the beverages prepared from them, they usually consist of malic acid, citric acid and tartaric acid.
The titration of the degassed beverage sample (freed from carbonic acid) is carried out potentiometrically using 0.25 mol/l sodium hydroxide solution either to a pH of 7.0 calculated as tartaric acid or to a pH of 8.1 calculated as citric acid.