This method describes how to evaluate the degree of contamination or the purity of malt as part a manual inspection procedure.
Malt intended for use in beer brewing or elsewhere in the food industry.
Visual examination of malt for foreign objects. Refer to the Sieving Test for Malt (R-200.08.011).
Desired condition: free of foreign material, stems and leaves
Points to be awarded: 1−5
Whole hops intended for use in beer brewing or elsewhere in the food industry
Evaluation of the harvested hops through visual inspection is employed in order to determine whether a portion may be deemed undesirable . This is aided by gravimetric determination of impurities as well as leaf and stem content.
This method describes how to determine the fermentable carbohydrates in wort or in the Congress wort using high performance liquid chromatography.
Applicable for all (laboratory) worts
Fructose, glucose as well as disaccharides and trisaccharides (maltose and maltotriose) are determined using high performance liquid chromatography (HPLC).
Wort or beer is deionized using an ion exchanger. The sample is filtered and concentrated using a solid-phase column and analyzed chromatographically. The concentration of the sugars present in the sample is calculated from the chromatograms obtained by analysis of the calibration solutions.
Applicable for all (laboratory) worts
The Congress wort is heated in order to inactivate the amylolytic enzymes, and afterwards, yeast is added and the wort is allowed to completely ferment out at a minimum temperature of 20 °C in a fermentation tube (fig. 1). The difference in the extract before and after fermentation is measured in order to calculate the limit of attenuation.
Applicable for all (laboratory) wort
The Congress wort is heated in order to inactivate the amylolytic enzymes, and afterwards added to an Erlenmeyer flask along with 7.5 g/100 ml yeast where it is allowed to completely ferment out under constant agitation. The difference in the extract before and after fermentation is measured in order to calculate the limit of attenuation.
This method describes how to determine the fermentable sugars in the (Congress) wort using high performance liquid chromatography.
Applicable for all (laboratory) worts
The separation is based upon a combination of reversed phase, normal phase, ion exclusion and ion exchange chromatography. The detection is carried out using an RI detector.