Hop extract intended for use in beer brewing or elsewhere in the food industry
Hops and hop products intended for use in beer brewing or elsewhere in the food industry
Hop constituents are distributed between an aqueous acidic methanolic phase and diethyl ether. Hop bitter substances extracted with ether are subsequently separated according to their different solubility properties in cold methanol and hexane into fractions: total resins, soft resins and hard resins. The soft resins are further separated according to their capacity to form complexes with lead salts into α-acids (conductometer value) and a β-fraction.
The Esbach reaction test provides an indication of the physical and chemical stability of beer, particularly for those which have been treated with bentonite [1, 2].
Suitable for all non-turbid beers
Higher molecular weight proteins are precipitated with the Esbach reagent (solution of picric acid and citric acid). The haze that is formed is determined spectrophotometrically.
This method describes how to determine the true color of water by means of spectrophotometry.
Water intended for use as an ingredient in the production of beer (brewing liquor) or other foods
The color of water is determined by measuring the absorbance at a minimum of three wavelengths at various points across the visual spectrum:
λ1 = 436 nm (obligatory), λ2 = 525 nm, λ3 = 620 nm (for λ2, λ3 minor deviations are permitted). If necessary, measurements at additional wavelengths must be carried out.
This method describes how to determine the clarity or turbidity of water using a transparent cylinder.
Water intended for use as an ingredient in the production of beer (brewing liquor) or other foods
This method describes the determination of the degree of transparency (or turbidity) of water and is primarily employed for on-site measurements.
Water intended for use as an ingredient in the production of beer (brewing liquor) or other foods